1. Home
  2. >
  3. Blog
  4. >
  5. How to Check and Accept the Composite Lumber Decking?

How to Check and Accept the Composite Lumber Decking?

Now more and more decoration owners choose composite wood flooring to lay the ground. As long as you follow the construction steps step by step and pay attention to details, the final floor paving effect should be very good. However, the seemingly simple project also requires acceptance testing at the end, so how to accept and check the composite wood floor

1. More and more house owners choose the composite lumber decking


Now more and more decoration owners choose composite wood flooring to lay the ground. As long as you follow the construction steps step by step and pay attention to details, the final floor paving effect should be very good. However, the seemingly simple project also requires acceptance testing at the end, so how to accept and check the composite wood floor?


2. How to check the composite lumber decking?


  • Listen


You can listen to whether the composite lumber decking will make a sound when it is stepped on. Walking back and forth on the floor, the footsteps should be heavier, especially in some special places, such as the position near the wall and the position of the door. Pay more attention to the acceptance of these places. If you find a place with a sound, you need to walk around repeatedly, and then determine the specific location of the abnormal sound and make a mark there. This kind of position with sound may be caused by improper operation during the construction process.


  • Check the appearance


The check of composite wood floor should pay attention to whether the floor is deformed or warped. Use a 2-meter ruler, leaning against the floor so that the flatness error should not exceed 3 mm. When measuring, try more places. If the pass rate is above 80%, it is qualified, otherwise, it is not.


If you find that the floor is partially arched, it may be that the quality of the floor is not qualified, which is a serious quality problem.


  • Check the color


We need to see whether the color of the composite wood floor is the same. If the color difference is too obvious, it will directly affect the aesthetics, so we can ask for a replacement. If the color is too consistent, there is almost no color difference, then we have to see whether the pattern on the floor surface is the same.


If the pattern of the floor is similar, it may be a craft wood floor, rather than the so-called precious wood material floor. Nowadays, some material suppliers will use ordinary wood flooring, but put a layer of precious wood on the surface to make it look expensive. They will tell you that this is done to prevent moisture, but in fact they are afraid that customers will find that the pattern on the reverse side is inconsistent with the front side.


  • Acceptance of skirting


Of course, we also have to carry out the acceptance of the skirting line, and the gap between the skirting line and the door frame should be less than 2 mm. The spacing between the seams of the skirting line should be less than 1 mm. The gap between the skirting line and the floor surface should be within the range of 3 mm to 5 mm. The height difference of the skirting buckle should be less 1mm.

This website uses cookies to ensure you get the best experience on our website.